-40%
Immersion Heater 1.0kW 240v 11” x 2.1/4
Immersion Heater 1.0kW 240v 11” x 2.1/4

Immersion Heater 1.0kW 240v 11” x 2.1/4"bsp Marine, Motorhome, Solar IMM100SU

$ 50.15

Availability: 14 in stock
  • Application: Camper/Caravan/Motorhome
  • Return shipping will be paid by: Buyer
  • Country/Region of Manufacture: Unknown
  • Restocking Fee: No
  • Voltage: 240 V
  • Condition: New
  • Brand: Surejust
  • Type: Immersion heaters
  • MPN: Does Not Apply
  • Power Source: Electric
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Item must be returned within: 14 Days
  • Power: 1000

    Description

    11" (275mm) immersed length, 2.1/4"bsp IMMERSION HEATER, 240v A.C. MAINS, 1.0kW (1000watts)
    Pt.no. IMM100SU
    Note that 2.1/4"bsp thread actually measures approx. 2.1/2" across. Please verify that this is the correct thread size and that the heater length is correct for your system before ordering (other threads and lengths available to order, eg 1.3/4"bsp which measures approx. 2" across)
    Designed for unvented hot water systems using hot water storage calorifers, as found in boats, caravans, campervans, horseboxes, chalets, etc.
    Allows production of hot water from a 240v shore line or hookup, or an on-board genset. The low power enables the heater to operate from the limited power supply available with many landline or shoreline hookups in marinas, campsites etc .
    These heaters will typically be inserted across the diameter of the tank, low down, not placed in the top of the tank pointing downwards (such heaters generally being much longer length).
    These immersion heaters have titanium elements, and a control thermostat with integral high temperature safety cut out (re-settable).
    If this cut out operates, it stays off and must be manually reset after the problem has been resolved.
    Standard 2.1/4"bsp thread, fits all our calorifer range and many other domestic and leisure vehicle cylinders. Complete with neoprene 'O' ring seal.
    See our other listings for more Calorifier accessories
    Weight - 700gms approx
    Attention overseas buyers. Buyer is responsible for all import duties, fees, taxes.
    Note that 2.1/4"bsp thread actually measures approx. 2.1/2" across. Please verify that this is the correct thread size and that the heater length is correct for your system before ordering (other threads and lengths available to order, eg 1.3/4"bsp which measures approx. 2" across) Allows production of hot water from a 240v shore line or hookup, or an on-board genset. The low power enables the heater to operate from the limited power supply available with many landline or shoreline hookups in marinas, campsites etc .   These heaters will typically be inserted across the diameter of the tank, low down, not placed in the top of the tank pointing downwards (such heaters generally being much longer length). Standard 2.1/4"bsp thread, fits all our calorifer range and many other domestic and lei